EPEVER SOLAR Demand CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER SOLAR Demand CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Demand Controller can be a highly effective solar controller made for off-grid solar programs. Dependant on multiphase synchronous rectification engineering, it assures optimized Strength conversion and process steadiness for a variety of photovoltaic (PV) purposes.
Vital Features of the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Cost Controller technological know-how for superior solar Power harvesting. Important capabilities include:
Multiphase Synchronous Rectification (MSR) for improved Electrical power conversion.
Highly developed MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Improved battery daily life.
Liquid crystal display Screen with actual-time information monitoring.
Multiple Load Management Modes which includes guide and timer.
In depth Electronic Protections against overcharging, over-discharging, shorter circuits, and reverse polarity.
Move-by-Move Tutorial to Putting together the EPEVER Tracer AN Collection Controller
one. Unboxing and Getting ready the Controller
Make sure all components are included: Tracer AN device, temperature sensor, interaction cables, and consumer guide.
Confirm the design range and voltage rankings match your solar panel and battery specifications.
two. Mounting the Demand Controller
Decide on a effectively-ventilated, dry area close to the battery lender.
Protected the Tracer AN controller using the supplied mounting brackets.
Maintain good clearance for warmth dissipation.
3. Wiring the Solar Demand Controller
Warning: Often follow good protection protocols and make sure the method is powered off prior to connecting parts.
Phase one: Join the battery terminals for the charge controller (favourable to beneficial, damaging to unfavorable).
Step two: visit here Link the photo voltaic panel array on the PV input terminals.
Move three: Link the load terminals if employing a immediate load connection.
Move 4: Double-check all connections for polarity and tightness.
four. Configuring the Controller Options
Power to the controller by connecting the battery 1st.
Use the Liquid crystal display Show to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Handbook, timer, gentle Manage.
five. Monitoring and Details Logging
The Tracer AN Sequence supports real-time checking using the MT50 distant meter.
Information is usually logged through the RS485 communication port working with computer software which include Photo voltaic Station PC.
Distant monitoring is achievable Using the EPEVER WiFi module.
six. Troubleshooting Typical Difficulties
Concern one: No Electrical power Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Difficulty two: About-Voltage Protection
Verify the photo voltaic array’s voltage ranking.
Alter system parameters if needed.
Problem three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options in the menu.
Advantages of the Tracer AN Collection with MSR Technological innovation
The multiphase synchronous rectification technology makes certain:
Higher Effectiveness: Lessened Vitality losses all through conversion.
Enhanced Dependability: Secure efficiency less than variable loads.
More time Battery Life: Steady and precise charging profiles.
Conclusion
The EPEVER Solar Cost Controller with multiphase synchronous rectification technology is surely an Fantastic choice for optimizing solar power era and increasing battery daily life. By following the above set up guide, consumers can assure maximum efficiency and technique longevity.